Digital Keypad

How do you allow guests to open your gate while still maintaining access control? With the weatherproof Digital Keypad.  The  Digital Keypad is programmable for up to fifteen different entry codes. Individual codes can be changed without affecting the other entry codes. For instance, you can give a delivery person a specific code to open your gate, and after the delivery you can change that code. The delivery person will no longer be able to use that code to gain access, however the other entry codes will still work for your other guests.

The digital keypad can be used as a wired or wireless installation for all E-Z Gate Openers and can be used as a wired installation for the Bulldog Pedestrian Gate Lock. In a wired installation, the Digital Keypad can operate a garage door. In a wireless installation, the Digital Keypad can be used with any garage door opener that receives a 318 Mhz FM, signal, and it can also be used in conjunction with the garage door receiver kit on any other garage door. The keypad requires 3 AA batteries. If the keypad is to be wired to the lock or gate opener, you will need to purchase 16 gauge, multi-stranded, low voltage wire.

Works With Models: 350, 500, & 502

(GTO FM137) - $51.48

Note: As of April 2006 these are now similar in size to the Keychain Mini Transmitters shown below.

Entry Transmitters

Automatic Gate Openers can be opened (and closed) with Entry Transmitters. All Entry Transmitters have adjustable code settings and each transmitter comes with battery included.

All Transmitters work with Models: 350, 500, & 502

Single Button Transmitter - comes standard with the E-Z Gate Opener systems.

(GTO FM135) - $ 27.88

Keychain Mini Transmitter - a miniature version of the Single Button Transmitter, and like its name suggests, hangs conveniently from your keychain.

(GTO FM134) - $27.88

Dual and Triple Button Transmitters - will operate two or three gate openers and/or garage door openers (see Garage Door Receiver).

Special Order! 3 Week Delivery Time

Dual Button (GTO RB742) - $30.45

Triple Button (GTO RB743) - $31.90

Digital Keypad and Intercom

This versatile digital intercom with keypad system is ideal for any residential application, alerting you of visitors and allowing gate opener activation form the safety of your home. The intercom provides superior range with crystal clear two-way communication up to 500 feet wireless or 1,000 feet wired.

• EZ to Install: Wireless or wired application.
• Superior Range: Crystal Clear two-way communication up to 500 feet wireless or 1000 feet wired.
• Access Control: Accept or deny access to your property with the touch of a button.
• Increased Surveillance: Screen visitors and solicitors safely from inside your home.
• Stand Alone Keypad: Up to 25 programmable entry codes.
• Convenient: Interior intercom is mobile and can be used anywhere in your home just like your cordless phone.
• Re-Chargeable Batteries: Allows operation even during power outage.

Works With Models: 350, 500, & 502

(GTO FM136) - $267.40

Push Button Entry Control

An unlit doorbell button for remote entry or exit control. If you do not need to limit access to your property, the push button control can be installed outside of the gate to allow entry for guests without transmitters. It can be installed on the inside of your gate to allow guests without transmitters to exit. If your home is within 1000' of your gate, you can install the push button in your house. The Push Button entry control wires directly into the control board using low voltage wire. (not included).

Works With Models: 350, 500, & 502

(GTO FM132) - $5.72

Gate Opening Sensor

The Sensor is an electromagnetic sensor, which offers "hands free" operation of the Mighty Mule Gate Opener.  Has a 12' radius of detection of vehicles in motion. Complete with 50' of cable.

Works With Models: 350, 500, & 502

(GTO FM138) - $181.97

Gate Opening Light Kit
with Digital Controller

Mighty Mule Digital Controller:

* Powers Lights and helps to conserve battery life. Lights come on when opener is activated and automatically shut off up to 120 seconds after gate is closed.

* Build-in Adjustable Time-On Control: Allows you to adjust how long the lights stay on from 0-120 seconds.

* Powers the Dust till Dawn Photo Cell: Prevents lights from coming on during the day and extends battery life.

Adjustable Mounting Hardware: Works for column or post mount applications and includes both in kit.

EZ Installation: Works with your current Mighty Mule Gate opener power system with no additional wiring or power source required.

Durable Housing & Lens: UV rated housing and professional grade lens prevent discoloration of lens. Lasts three times longer than most residential grade lenses.

Decorative and Functional: Enhances the appearance of your entrance and allows you to clearly see the drive.
 

Works With Models: 350, 500, & 502

(GTO FM124) - $146.20

Garage Door Receiver

Allows the use of one Entry Transmitter (see Dual or Triple Button Transmitters) to control both gate openers and garage door openers. The Garage Door Receiver is compatible with most garage door openers.

Special Order! 3 Week Delivery Time

Works With Models: 350, 500, & 502

(GTO RB709) - $42.90

Automatic Gate Lock/Pull to Open

Designed to use with the Single or Dual Gate Operators for added security. The Automatic Gate Lock also provides stability for the gate in the closed position - especially in areas where high winds are common. The gate lock is solenoid driven, and it has a plated steel bolt and a zinc plated steel housing. It comes with keys and key switch to allow manual release when necessary.

Works With Models: 350, 500, & 502

(GTO FM143) - $173.27

Master Pin Lock

Substitutes for the clevis pin at either or both mounting points of the gate opener.  The pin lock deters theft of the opener arm but still allows the key holder to manually open the gate when necessary.

Works With Models: 350, 500, & 502

(GTO FM133) - $17.40

Bulldog Pedestrian Gate Lock

Designed for horizontal use on '`walk-thru" gates. The Bulldog is an affordable solution for protecting swimming pool areas, playgrounds, tennis courts, boat docks, etc., from unwanted access. Can be used with Digital Keypad (FM 137 or FM 136) and is solar compatible.

(GTO FM145) - $124.40

Column Mount Lock Receiver

For mounting the Automatic Gate Lock (FM143) or the Bulldog Pedestrian Gate Lock (FM145) on brick columns, walls, or for other applications with limited space between gate and post.

For Models 350, 500 & 502

(GTO 433IH) - $16.50

Push-to-Open Bracket

Push to Open Bracket (for swing gates only) . Required when a Mighty Mule Gate Opener(s) must push a gate open, such as on a sloping driveway or where space prevents gate(s) from opening inward (pulled open). Order two brackets for a dual swing gate installation.

For Models 350, 500 & 502

(GTO FM148) - $16.50

Replacement Battery

Standard 12 Volt, 7.0 amp-hour, maintenance-free battery for the Mighty Mules Gate Opener systems.

For Models 500 & 502

(GTO FM150) - $27.52

Replacement Transformer

Standard 18 Volt AC transformer that is included with all Mighty Mule gate openers and is for maintaining battery backup

For Models 350, 500 & 502

(GTO RB570) - $14.90

Solar Panel

A solar battery charger for the Automatic Gate Openers. The Solar Panel is necessary for gate opener installations more than 1000 ft. from an AC power source, or where solar power is preferred.

The Five Watt Solar Panel (19 3/8" x 8 1/2")  comes with everything you need for installation including 8 ft. of low voltage wire.

There are a number of factors which determine the number of solar panels you will need, such as: the weight of your gate(s); the amount of sunlight the solar panel will receive; the number of operating cycles per day; and the number of gate opener accessories.

Works With Models: 350, 500, & 502

(GTO FM121) - $ 152.25

More information
 

Low Voltage Wire

Required for wiring the Automatic Gate Opener to the AC Transformer. It is also necessary for connecting some accessories such as the Push Button Entry Control and the Digital Keypad (wired option). This wire is 16 gauge, dual conductor, multi-stranded, and is ready for direct burial.

This is the only wire recommended for use with these products. This 16 gauge, PVC sheathed wire will enable the transformer to provide an adequate charge to the control board from as far away as 1000 ft.

Do not use telephone wire or any solid core wire; this wire does not work as well as the multi-stranded and can cause the opener to go into low voltage lockout. Never splice wires together. Splicing will seriously reduce the wire's ability to carry an adequate current and it provides a weak point for corrosion.

Works With Models: 350, 500, & 502

(GTO RB509) - $ . 42/ft
Sold by the foot - enter length in the QTY box.